Applied-motion STAC6-C Manuale Utente Scaricare il pdf (Pagina 36)

STAC6 Hardware manual

920-0029 Rev. C

5/2/2012

Basic Speciﬁcations:

• The analog input can accept ±10 Volts.

• The input has an impedance of 20K ohms.

• Because of the nature of the design, the input will exhibit a 1.4V offset when not driven by an analog

source.

• Low source impedance is important for minimizing analog errors, 100 ohms or lower is recommended.

WARNING - The analog input must be used with care. It is not optically isolated and may

operate improperly or could be damaged when system grounds are not compatible.

Connecting an Analog Input to a Potentiometer or Joystick

ccw

1k-10k

pot

+5V

AIN+

GND

AIN-

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 56 57

Nessun commento

Applied-motion STAC6-C Manuale Utente Pagina 36