Applied-motion ST10-S Manuale Utente

Navigare online o scaricare Manuale Utente per Hardware Applied-motion ST10-S. Applied Motion ST10-S User Manual Manuale Utente

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 2
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 0
Serial No
Error Codes
GR-Green
RD-RED
DRIVE OVER TEMP 1 GR + 3 RD
VOLTAGE HIGH 1 GR + 4 RD
VOLTAGE LOW 2 GR + 4 RD
OVER CURRENT 1 GR + 5 RD
COMM ERROR 1 GR + 7 RD
ST5-S
GND
B-
B+
A-
A+
V-
V+
AN1
+5V
OUT+
OUT-
EN-
EN+
DIR-
DIR+
STEP-
STEP+
ST5/10-S Quick Setup Guide
Requirements
A compatible stepper motor.
A small at blade screwdriver for tightening the connectors (included).
A personal computer running Microsoft Windows 95, 98, NT, Me, 2000 or XP, Vista or 7.
ST Congurator™ software (available at www.applied-motion.com).
An Applied Motion programming cable (included).
For more detailed information, please download and read the ST5/10-S Hard-
ware Manual, available at www.applied-motion.com/support/manuals.
To begin, make sure you have the following equipment:
Step 1
a. Download and install the ST Congurator™ software.
b. Launch the software by clicking:
Start / Programs / Applied Motion Products / ST Congurator
c. Connect the drive to your PC using the appropriate programming cable.
Step 2
a. Wire the drive to the DC power source.
(do not apply power until all connections to the drive have been made)
Note, the ST5-S accepts DC voltages from 24-48V, while the ST10-S accepts
DC voltages from 24-80V.
b. Ensure a proper earth ground connection by using the screw on the left
side of the chassis.
If using an external fuse, we recommend the following:
ST5: 3AG, 4 amp (Littlefuse 313004P)
ST10: 3AG, 6.25 amp (Littlefuse 3136.25P)
See the ST5/10-S Hardware Manual for more information about
power supply and fuse selection.
Connection Panel
920-0001 F
Vedere la pagina 0
1 2

Sommario

Pagina 1 - ST5/10-S Quick Setup Guide

Serial NoError CodesGR-GreenRD-REDDRIVE OVER TEMP 1 GR + 3 RDVOLTAGE HIGH 1 GR + 4 RDVOLTAGE LOW 2 GR + 4 RDOVER CURRENT 1 GR + 5

Pagina 2

Warning - If you are using a non-Applied Motion motor, do not connect the motor un-til after you have congured the drive for your motor. Refer to Ste

Modelli collegati ST5-S

Commenti su questo manuale

Nessun commento